Tag Archives: Analyzer

GL conveys the availability of its OC-3 STM-1 and OC-12 STM-4 ATM Protocol Analyzer

Posted on by
Reply


Gaithersburg, Maryland (PRWEB) April 10, 2012

GL Communications Inc. a leader in providing PC-based test, analysis and simulation products and consulting services to the worldwide telecommunications industry, conveyed today the availability of its product OC-3 STM-1 and OC-12 STM-4 ATM Protocol Analyzer software.

Speaking to media persons, Mr. Vijay Kulkarni CEO of the company said, Asynchronous Transfer Mode (ATM) is a flexible network, which carries voice, video, and data in the same way, i.e. fixed length cells.

He added, ATM network basically has two kinds of interfaces i.e. UNI (Interface between ATM User and Public ATM switch) and NNI (Interface between two Public ATM switches). Similar to the OSI Protocol model, ATM protocol architecture has an ATM Layer as Layer 2, ATM Adaptation Layer (AAL) as Layer 3, and other higher layers depending on C-Plane, U-Plane or Layer Management Plane. User information is transferred across U-Plane and Signaling messages are transferred across C-Plane. ATM-UNI signaling is used to create and release SVCs along with a particular QoS attached to it depending bandwidth on demand.

Mr.Kulkarni further added, GL’s OC-3 STM-1 OC-12 STM-4 ATM Protocol Analyzer is used to analyze and decode different ATM protocols like ATM, AAL2 Protocols (CPS-SDU, SSSAR-SDU, and SSCS), AAL5 (CPCS), UNI and others across U plane and C plane of UNI and NNI interface.

Important Features

GL Conveys the Availability of Its OC-3 STM-1 and OC-12 STM-4 Analyzer for Packet Over SONET (POS) Mode

Posted on by
Reply


Gaithersburg, MD (PRWEB) April 07, 2012

GL Communications Inc., a leader in providing PC-based test, analysis and simulation products and consulting services to the worldwide telecommunications industry, conveyed today the availability of its product OC-3 STM-1 and OC-12 STM-4 Analyzer software for POS mode.

Speaking to media persons, Mr. Vijay Kulkarni CEO of the company said, Packet Over SONET (PoS) is a highly scalable layer 2 protocol that uses PPP encapsulation to carry IP packets directly in SONET/SDH networks. Currently it carries a majority of the Internet traffic because it can make efficient use of existing SONET infrastructure. The protocol uses practically all optical interfaces as defined by the Internet Engineering Task Force (IETF).

He added, GLs OC-3 STM-1 and OC-12 STM-4 analyzer is referred to as LightSpeed1000 analyzer supports Packet over SONET / SDH (PoS) at OC-3 STM-1 and OC-12 STM-4 at full rates over dual interfaces. Access, capture, analysis, and emulation of PPP and HDLC, all carrying IP traffic in real-time makes this card useful to many applications including Routing, Deep Packet Inspection, and other Internet traffic applications. Multiple cards can be installed in a PC making it scalable to monitor or generate OC-3 or OC-12 traffic on multiple ports. Each port on a card can work independent of others, which extends analyzer’s flexibility as test equipment.

Important Features

GL Conveys the Availability of its PPP Protocol Analyzer over T3 E3

Posted on by
Reply


Gaithersburg, MD (PRWEB) March 27, 2012

GL Communications Inc. a leader in providing PC-based test, analysis and simulation products and consulting services to the worldwide telecommunications industry, conveyed today the availability of its product PPP Protocol Analyzer over T3 E3 lines.

Speaking to the press, Mr. Vijay Kulkarni CEO of the company said, The Point-to-point protocol (PPP) is a link layer protocol, which encapsulates other network layer protocols like IP for transmission on synchronous and asynchronous communications lines. When transmitted over a T3 E3 line, PPP frames are based on the HDLC frame structure.

He added, Today the PPP protocol standard finds wide use in synchronous connections between LANs, bridges, routers and other intermediate devices. Two major features of PPP protocol are: Authentication, and Encapsulation of higher layer protocols.

Mr.Kulkarni further added, The PPP Analyzer captures a host of PPP protocols exchanged between the two nodes over T3 E3 links & provides useful analysis, which includes distribution of protocols, protocol fields, frame lengths and frame status. User can obtain detailed analysis of the protocol and can perform various statistics measurements.

Main Features

GL Conveys the Availability of Its ATM Protocol Analyzer Software

Posted on by
Reply


Gaithersburg, MD (PRWEB) March 06, 2012

GL Communications Inc. a leader in providing PC-based test, analysis and simulation products and consulting services to the worldwide telecommunications industry, conveyed today the availability of its product ATM Protocol Analyzer software.

Speaking to the press, Mr. Vijay Kulkarni CEO of the company said, Asynchronous Transfer Mode (ATM) is a flexible network, which carries voice, video, and data in the same way, i.e. fixed length cells. It has generated a number of revenue opportunities because of its different classes of service support for multimedia traffic, efficient bandwidth management for burst traffic, support for LAN/WAN architecture and high performance via hardware switching.

He added, GL’s ATM Analyzer is used to analyze and decode different ATM protocols like ATM, AAL2 Protocols (CPS-SDU, SSSAR-SDU, and SSCS), AAL5 (CPCS), UNI etc across U plane and C plane of UNI and NNI interface. The analyzer can also decode ATM frames constituting Classical IP over ATM, or CIP based networks. The analyzer is also capable of capturing & reassembling frames that were transmitted with Inverse Multiplexing. IMA (Inverse Multiplexing Analyzer) combines up to 8 T1 E1 links to form a single high-speed connection with flexible bandwidth options.

Important Features

GL Conveys the Availability of its TRAU Protocol Analyzer Software

Posted on by
Reply


Gaithersburg, Maryland, (PRWEB) February 25, 2012

GL Communications Inc. a leader in providing PC-based test, analysis and simulation products and consulting services to the worldwide telecommunications industry, conveyed today the availability of its product TRAU Protocol Analyzer software.

Speaking to the press, Mr. Vijay Kulkarni CEO of the company said, GL’s TRAU Analyzer is used to non-intrusively monitor TRAU frames at the A-bis interface (BTS to BSC links), and A-ter interface (BSC to MSC links). Application can automatically detect and capture TRAU frames of half rate (HR-8 kbps) or full rate (FR-16 kbps). Various codecs such as FR, EFR, AMR, AMR-WB, HR and Data are used for compression/decompression of speech. TRAU frames are decoded as per the specifications GSM 08.60 V 8.2.0 Release and GSM 08.61 V 8.1.0 Release.

He added, Analysis of TRAU calls, including detail statistics, wave graph, oscilloscope, spectral display for various codecs can be done using TRAU Packet Data Analysis (PDA) feature. It also allows users to play voice files to speaker, write speech data to a file, filter calls, detect digits and view graphs such as Active Calls, and Traffic Monitoring to identify Full Rate and Half Rate traffic with traffic type and direction in a pictorial format.

Mr. Kulkarni further added, A-bis Signaling can be monitored using GSM Analyzer (optional). Traffic Analyzer Detail View allows the user to have a detail look at one (or two) TRAU sessions that are part of a single call. The view is divided into two parts, which assists in any comparisons to be made between the two sessions.

Some of the Important Features

Panera Bread Selects APT Test & Learn and Menu Analyzer

Posted on by
Reply

Washington, D.C. (PRWEB) February 1, 2010

Applied Predictive Technologies (APT) announced today that Panera Bread Company, a leading specialty food restaurant chain, has signed an agreement to license APT’s Test & Learn Management System and APT Menu Analyzer.

Panera Bread chose to license APTs Software-as-a-Service solutions after a Pilot project demonstrated the rigor and sophistication of APTs platform and helped drive substantial incremental profits. Panera has used APT technology to make key business decisions related to national-scale media buys, product offering, major promotions, pricing changes and network planning.

With this agreement, Panera joins a number of leading restaurant companies — including Subway, Starbucks, and Darden — that use APTs solutions to address a broad range of issues, including menu optimization, marketing, pricing, cap-ex investments, staffing, operations and more.

According to Ronald Shaich, Panera Breads Co-Founder, Chairman and CEO, Panera is laser-focused on providing our customers with outstanding food and an unparalleled experience. APTs software gives us a better understanding of marketplace dynamics, particularly what our customers want. The executive team and I have been impressed by the valuable insights we have generated with the APT platform, and we look forward to continuing our work with APT to enhance our long-term strategy.

In a highly competitive industry, Panera Bread stands out for its high-quality offering, focus on the customer, and continued innovation and creativity, said Anthony Bruce, CEO of APT. “Their industry-leading financial performance is evidence of the quality of their business decisions. We are very pleased to continue our partnership with Panera and we look forward to being a part of their continued success.”

About Panera Bread

Panera Bread (NYSE: PNRA) owns and franchises 1,362 bakery-cafes as of September 29, 2009, under the Panera Bread, Saint Louis Bread Co.

GL Conveys the Availability of its Frame Relay Protocol Analyzer Software

Posted on by
Reply


Gaithersburg, Maryland (PRWEB) February 04, 2012

GL Communications Inc. a leader in providing PC-based test, analysis and simulation products and consulting services to the worldwide telecommunications industry, conveyed today the availability of its product Frame Relay Protocol Analyzer software.

Speaking to media persons, Mr. Vijay Kulkarni CEO of the company said, Frame Relay is commonly used data link protocol based on packet switching technology. It is mainly incorporated by the corporate data networks due to its cost-effective data transmission, and flexible bandwidth. Frame relay is mostly used to connect local area networks with major backbones; also used in public wide area networks and in private network environments with leased lines over T1/E1 lines.

He added, GL’s Frame Relay Protocol Analyzer can be used to analyze and decode frames conforming to Q.921, Q.922, LAPF, Frame Relay Forum standard -FRF.9 and FRF.12, Multiple Protocol Encapsulation, LCP RFC1661, Q.933 SVC and LMI SNAP, PPP, IP, SMTP, POP3 and so on.

Important features

GL Conveys the Availability of its Frame Relay Protocol Analyzer Software

Posted on by
Reply


Gaithersburg, Maryland (PRWEB) February 04, 2012

GL Communications Inc. a leader in providing PC-based test, analysis and simulation products and consulting services to the worldwide telecommunications industry, conveyed today the availability of its product Frame Relay Protocol Analyzer software.

Speaking to media persons, Mr. Vijay Kulkarni CEO of the company said, Frame Relay is commonly used data link protocol based on packet switching technology. It is mainly incorporated by the corporate data networks due to its cost-effective data transmission, and flexible bandwidth. Frame relay is mostly used to connect local area networks with major backbones; also used in public wide area networks and in private network environments with leased lines over T1/E1 lines.

He added, GL’s Frame Relay Protocol Analyzer can be used to analyze and decode frames conforming to Q.921, Q.922, LAPF, Frame Relay Forum standard -FRF.9 and FRF.12, Multiple Protocol Encapsulation, LCP RFC1661, Q.933 SVC and LMI SNAP, PPP, IP, SMTP, POP3 and so on.

Important features

Total Phase Wins Test & Measurement World’s Best in Test Award for the Beagle USB 5000 SuperSpeed Protocol Analyzer

Posted on by
Reply


Sunnyvale, CA (PRWEB) February 03, 2012

Total Phase, a provider of industry-leading USB, I2C, SPI, and CAN embedded systems tools, is pleased to announce that Test & Measurement World has honored the Beagle USB 5000 SuperSpeed Protocol Analyzer with the 2012 Best in Test award in the Bus & Logic Analyzer category. The awards winners were selected by the editors of Test & Measurement World.

“We are honored to win the Best in Test Award for the Beagle USB 5000 analyzer,” said Derek Fung, VP Business at Total Phase. “We would like to thank the editors of Test & Measurement World and all the engineers that voted for us. We believe that the Beagle analyzer’s real-time, interactive capabilities provides developers with the very best USB 3.0 debugging interface. It is very rewarding to have the industry recognize this and name the Beagle analyzer as the best bus analyzer of 2012.”

About the Beagle USB 5000 SuperSpeed Protocol Analyzer

The Beagle USB 5000 analyzer is an affordable solution for monitoring and debugging USB 3.0 traffic in real time. Featuring an advanced state-based matching system and cross-platform support for Windows, Linux, and Mac OS X, the Beagle USB 5000 analyzer is a full-featured protocol analysis tool. Combined with the 2010 Best in Test Finalist, Data Center Software, users experience the only interactive, real-time USB 3.0 test solution on the market, allowing them to maximize their efficiency and reduce their time to market. For more information, please visit the Beagle USB 5000 analyzer page: http://www.totalphase.com/products/beagle_usb5000/

About the Best in Test Awards

The program comprises three main categories the Best in Test Product Awards, the Test of Time awards, and Test Engineer of the Year award. The 2012 Best in Test Product Awards recognize innovations released between November 1, 2010 and September 30, 2011 that have made an especially significant contribution to the test industry. Each year finalists are selected from among the nominees by Test & Measurement Worlds editors, after which Test & Measurement Worlds engineering audience are invited to vote for the winners using an online ballot. Test & Measurement World then uses a combination of these audience votes and balloting by its editorial staff to determine the Best in Test and Test of Time winners.

For additional information on the awards program, visit: http://www.tmworld.com/article/520453-Finalists_for_T_MW_s_2012_awards.php

About Total Phase

Total Phase manufactures powerful and affordable USB, I2C, SPI, and CAN development tools for the embedded systems engineer. The entire line of developer tools combines best-of-breed features, Windows, Linux, and Mac OS X support, royalty-free API, and free software updates, making them perfect additions to any engineer’s toolbox. Total Phase products have become the tools of choice for Fortune 500 companies, small businesses, and research institutions alike. Our satisfied customers represent a diverse array of industries such as automotive, consumer electronics, medical devices, semiconductors, and telecommunications.

Please visit us at http://www.totalphase.com

About Test & Measurement World

Test & Measurement World serves the information needs of engineers in the electronic original equipment market (EOEM), which includes manufacturers of test equipment, medical equipment, aircraft and aerospace, automotive, consumer electronics, and other products and services, as well as engineers in the electronic test, measurement, and inspection industries. Engineers can access technical information geared for on-the-job application, as well as industry news, coverage of the latest standards and technologies, application notes, product specifications, how-to articles, industry events, blogs, and contests. Over 60,000 individuals in engineering management, engineering technical/staff, and corporate and general management rely on Test & Measurement World to keep them up-to-date on current developments, regulatory requirements, trends, and innovations in the test and measurement marketplace.

About UBM Electronics

UBM Electronics is the global leader in media and marketing solutions for the electronics industry. UBM Electronics delivers results for the key influencers and decision makers involved in the design, development, and commercialization of technology through its market leading brands, peer communities, and professional education services. More than 2.2 million engineering professionals engage with the UBM Electronics global brands, which include EE Times, EDN, EDN China, EDN Asia, EDN Japan, Design News, Test & Measurement World, TechOnline, EBN, Datasheets.com, Designlines, and Embedded.com. The international electronics community gathers at UBM Electronics’ market-leading events such as the Embedded Systems Conferences, DesignCon, and ARM Technology Conference to share, learn, and address the critical issues and challenges facing the electronics industry. Additionally, UBM Electronics provides end-to-end services ranging from next-generation marketing, integrated media, custom solutions, and research to accelerate technology sales. UBM Electronics is part of UBM (UBM.L) a global provider of media and information services for professional B2B communities and markets.

###





More Monitor Press Releases

VKernel Takes VMware vCenter Beyond Simple Monitoring with New Performance Analyzer

Posted on by

Andover, Massachusetts (Vocus/PRWEB) March 15, 2011

VKernel, the award winning provider of enterprise class capacity and performance management products for virtualized data centers and the cloud, announced today general availability of the new VKernel Performance Analyzer. Tapping into experience with over 600 global customers, VKernel Performance Analyzer is designed to monitor, diagnose, and resolve performance issues in virtual environments. Performance Analyzer complements the existing monitoring capabilities in VMware vCenter with real time analysis of system metrics and alerts to determine both abnormal trends and root cause, impact, and resolution of VMware performance issues. Performance Analyzer 1.0 ships as a new product in the award winning VKernel Capacity Management Suite, which is being renamed to reflect these new broader capabilities as the VKernel vOperations Suite or vOPS 3.0.

New Performance Analyzer

As more and more business critical applications migrate to virtual infrastructures, the need to maintain confidence in the performance of these applications only intensifies. Failure to sustain VMware performance results in VM deployment stall, downtime and availability issues. Unfortunately, monitoring, diagnosing, and resolving VMware performance issues is extremely complex due to the shared nature of resources. The complexity in resolving issues is amplified by the overabundance of metrics, alarms and alerts that overwhelm a virtualization administrator with information.

Solving this problem requires three steps: monitoring, diagnosis and resolution. Most monitoring systems only repackage performance data, recreating capabilities available in VMware vCenter. They also lack the analytic capabilities to offer issue diagnosis or resolution steps. Other monitoring systems that use general mathematical modeling to discern issue root causes lack virtualization domain knowledge and while sometimes identifies where a problem lies, cannot offer specific remediation steps.

VKernel Performance Analyzer is designed to complement the existing monitoring capabilities in VMware vCenter to provide both the diagnosis and resolution of VMware performance problems. Performance Analyzer uses real time analysis of system alerts and metrics to determine both abnormal trends and root cause, impact and resolution of current VMware performance issues. Performance Analyzer combines trend, sequencing and relationship/connectivity analyses with decision algorithms that build in deep domain-specific knowledge to produce actual problem resolutions for virtualization administrators. Performance Analyzer accomplishes this, however, with a simple to download, easy to use application that provides value to system administrators within an hour of installation.

VKernel Performance Analyzer is designed to meet the demands of the following use cases: